Product Details

• Amazon Sales Rank: #98035 in Home Improvement
• Brand: Porter-Cable
• Model: FN250B
• Dimensions: 9.10 pounds

Amazon.com Review
With this 2-1/2-inch, 16-gauge finish nailer, Porter-Cable continues to make good on their reputation as one of the top pneumatic toolmakers. The gun's straight magazine is well thought out, made from aluminum, and top loading. This is a sturdy, compact nailer that shoots a conveniently wide range of 16-gauge nails, from 3/4 to 2-1/2 inches. The nailer has a good balance and a nice, thin grip made of porous rubber. (You don't have to have the hands of a giant to comfortably operate this gun.) The gun has a nicely designed depth-of-drive adjustment. There's also a muffled exhaust port, so it's quieter than a lot of other nailers--plus the exhaust port is adjustable, so you can direct the discharge where you want it. The gun's also lighter than we'd expected, always a good thing in a tool a lot of us use all day long. --Jon Groebner

From the Manufacturer
Porter-Cable FN250B 3/4-Inch to 2-1/2-Inch 16-Gauge Finish Nailer

From the Manufacturer
When you look at the success Porter-Cable has had with their original FN series nailer you may wonder why they wanted to improve on it. But once you realize Porter-Cable is never satisfied with just being the best you begin to understand. This new FN250B is a complete redesign from the ground up. This is evident with the slimmed down, smooth body, which shaved almost 2 ounces off the weight of the tool. We didn't stop there however, we incorporated a Teflon cylinder to reduce drag and increase O-ring life and reengineered the piston bumper to house a piston "catch" to ensure the full stroke of the driver blade will always be utilized. The in-line angle magazine is attached directly to the body housing eliminating the need for a bracket that is prevalent in all other FN nailers. This unique mounting system eliminates out-of-aligned magazines due to dropping or misuse. The tapered magazine provides more clearance for installing crown moldings or nailing in tight spaces. With the ability to shoot all 16 gauge finish nails ranging from 3/4-inch to 2-1/2-inch without the use of a nail guide, the applications for this gun are endless. A built-in depth-of-drive adjustment with 8 detents allows consistent countersinking of each nail regardless of wood type. The exhaust port is muffled to keep noise to a minimum and is adjustable to direct air away from the operator without the need of tools. A non-marring tip protects delicate projects but can be removed when more visibility or tip clearance is needed. The quick-release nosepiece allows quick clearing of jammed nails when hidden obstructions like drywall nails or nail plates are hit. The standard restrictive-fire trigger provides more safety and the carrying case ensures nails, safety glasses and oil are always on hand. Includes nailer, carrying case, pack of 1,000 finish nails, 1/4-inch coupler plug with dust cap, oil, Allen wrenches, and operator's manual.

FEATURES

• Uses 16 GA. finish nails from 3/4" to 2-1/2"
• Streamlined body design for better grip, balance, and style
• Sturdy aluminum extruded magazine
• Internal piston catch mechanism keeps piston at initial position - for consistent power
• Tool-free nail depth control with detents
• Tool-free jam release mechanism designed not to block line of sight
• Tool-free adjustable exhaust
• Non-marring nose tip with on tool storage
• Standard Equipment: Nailer, case, box of 1000 finish nails of 2", 1/4" plug with cap, oil, wrenches, and operating manual

SPECIFICATIONS

• Fastener Type (Inches): 16 Ga. Finish Nails
• Shipping Weight (Lbs.): 8
• Fastener Range (In): 3/4 to 2-1/2
• Magazine Capacity: 100 Nails
• Jam Clearance: Side Lever Type Quick release Nose
• Operating Pressure: 70-120 psi
• Firing Modes: Sequential Fire
• Height (Inches): 10-3/4
• Length (Inches): 11-3/4
• Weight (Lbs.): 3-3/4

WARRANTY
Backed by Porter-Cable's one-year limited warranty.

Customer Reviews

Most helpful customer reviews

95 of 97 people found the following review helpful.
Great Unit, If your buying one, this is the one to get
By Bob Feeser
I have three Porter Cable finish nailers, the 18 gauge brad nailer, the 16 gauge finish nailer, and the 15 gauge angle finish nailer.
Excuse me for stating the obvious, but the 18 gauge leaves the tiniest hole, which is nice for clear finish work. The 16 gauges hole is a bit larger, but still acceptable for clear finishes on larger trim work. The new 15 gauge, actually leaves a D Shaped hole. It is kind of large, and is designed for putty and paint. The 15 gauge is a bear though. When you fire it for the first time, POW, you know it is stronger than the 16. Although I haven't had any unusual problems with the depth drives on the 16, other than knot concerns.
If I had to choose one nailer, instead of all three, I would say this 16 gauge would give you the most universal use.
This 16 gauge, has great ergonomics, fires reliably, (keep your finger off of the trigger when plunging the nose) and overall does a very nice job. Keep it oiled.

35 of 36 people found the following review helpful.
Porter Cable FN250B .....WOW......
By A Customer
I wanted a finish nailer that could make my nailing job easier
as I suffer from Carpal Tunal Syndrome. I conducted research on the reliability, price and features on several different finish nailers. I spoke to trades people and co-workers who had Porter Cable tools, and came away impressed. This was my first Porter Cable Tool and air nailer purchase.

What impresses me most about the FN250B air nailer is the balanced feel and weight of this tool along with the padded handle. The nailer loads easily and has never jammed. Adjusting the depth of the nails is simple.

I use the FN250B finish nailer on home improvement projects like crown molding installation and building custom shelving. I wonder why I didn't buy one years ago.

34 of 35 people found the following review helpful.
Easy and dependable for the novice
By A Customer
I purchased this nailer to replace the ceiling in a 100 year old farm house. No previous experience with nailers or remodeling for that matter so I checked the reviews, then went for the best deal. I played with it for a day in scrap wood to learn how to adjust the depth of fire and get the feeling of how it worked. It never double fired, jammed, or misfired, worked well upside down and was light enough to keep above your head for multiple nailings and I never got fatigued. My girlfriend even used it without a problem and thought it was very easy to use. It is not intended for tight spots though so the corners were tricky. I oiled it per manufacturers suggestion and it worked without a hitch. Get the angled one if you are going to do a lot of moulding work or have tight spaces. I would highly recommend this product